eva dorney goldsmith | contemporary handmade jewellery design

View Original

Punch set diamond bangle remodel

I've been making an awful lot of recycled gold bangles of late and I thought I'd share this one which has been embellished with 5 round brilliant cut diamonds punch set at intervals across the top.

Punch set diamond bangle remodel

Rosie had the usual assortment of broken chains, odd earrings and unworn rings which amounted to some 25g of gold and which as you can see turned in to a lovely heavy weight, flat gold bangle. From the crucible the molten metal was poured into the ingot mould to make a rather gnarly looking ingot. It was then run through the rolling mills to make it into a smooth, workable bar of metal. This bar was repeatedly passed through the mills between annealings (softening the gold by heating and quenching) until it was 200mm long, 4.3mm wide and 2.7mm deep. The wire was then turned up into an oval and the soldered closed. Once the fire stain was cleaned back, any scratches removed and the bangle prepolished I marked out 5 equidistant points along the top of the bangle opposite the seam and set each with a 0.03ct diamond.

And there you have it, one gold bangle with diamonds!